RAM Wheelchair Seat Mount for Xbox Adaptive Controller

With the included universal hardware pack, this track mount will attach to most major wheelchair brands that feature a seat track system.

Xbox Adaptive Controller not included.

SKU: RAM-238-WCT-9-MS2 Category: Tags: , , , ,

Clamp the small RAM Tough-Claw to your wheelchair – as well as rails, bars and flat surfaces – to enable use of the Microsoft Xbox Adaptive Controller. The controller attaches directly to the included RAM diamond base adapter with 1.5” ball and double socket swivel arm, allowing for a 90-degree tilt so you can angle the adaptive controller exactly where you need it.

When you’re not using the Xbox Adaptive Controller, swap it out with any compatible RAM 1.5” ball base, such as the RAM X-Grip cradle for phones and tablets.

Attaches to most wheelchair arm track systems including Invacare, Permobil, and Quickie, as well as any other universal mounting point with the included universal hardware pack.

This inclusive gaming kit includes hardware and a hex wrench for mounting an Xbox Adaptive Controller.


XAC Instructions

Microsoft Adapt (PDF)

Wheelchair Instructions

Wheelchair Ball (PDF)

Weight 0.86 kg
Included Hardware

2x #10-24 x 1/2" Machine Screws
1x 5/32" Hex Key Wrench
2x #10-32 T-Nuts
2x #10-32 Flat Weld Nuts
2x #10-32 x 1/2" Machine Screws
2x M4 x 12mm Machine Screws
2x M4 x 20mm Machine Screws
2x M4 Stainless Steel Washers
2x M4 Nylock Nuts

T-Bolt Dimensions

Small: 0.95 x 1.51 cm (.375" x .593")
Large: 1.22 x 2.41 cm (.48" x .95")

Hole Pattern

2-Hole AMPS: 48.5 mm (1.912") – Both Plates

Ball/Socket Size

1.5" (3.81 cm) – C Size

Weight Capacity

Standard Use: 1.8 kg
Heavy-Duty Use: 1.4 kg


Marine-Grade Aluminum
High Strength Composite

You may also like…

Copyright © 2024 DTSL (Assistive Technology). All rights reserved.