RAM Wheelchair Arm Mount for Xbox Adaptive Controller

Attach this wheelchair arm track mount directly to your wheelchair’s arm track system to enable use of the Microsoft Xbox Adaptive Controller.

Xbox Adaptive Controller not included.

SKU: RAM-238-WCT-2-MS2 Category: Tags: , , , ,

The controller attaches to the included RAM diamond base adapter with 1.5” ball and double socket swivel arm, allowing for a 90-degree tilt so you can angle the adaptive controller exactly where you need it.

On the opposite end of the arm, another diamond base adapter with 1.5” ball attaches to most wheelchair arm track systems including Invacare, Permobil, and Quickie, as well as any other universal mounting point with the included universal hardware pack.

When you’re not using the Xbox Adaptive Controller, swap it out with any compatible RAM 1.5” ball base, such as the RAM X-Grip cradle for phones and tablets.

This inclusive gaming kit includes hardware and a hex wrench for mounting an Xbox Adaptive Controller.


XAC Instructions

Microsoft Adapt (PDF)

Wheelchair Instructions

Wheelchair Ball (PDF)

Weight 0.48 kg
Included Hardware

2x #10-24 x 1/2" Machine Screws
1x 5/32" Hex Key Wrench
2x #10-32 T-Nuts
2x #10-32 Flat Weld Nuts
2x #10-32 x 1/2" Machine Screws
2x M4 x 12mm Machine Screws
2x M4 x 20mm Machine Screws
2x M4 Stainless Steel Washers
2x M4 Nylock Nuts

T-Bolt Dimensions

Small: 0.95 x 1.51 cm (.375" x .593")
Large: 1.22 x 2.41 cm (.48" x .95")

Socket-to-Socket Length

18.2 cm

Hole Pattern

2-Hole AMPS: 48.5 mm (1.912") – Both Plates

Ball/Socket Size

1.5" (3.81 cm) – C Size

Weight Capacity

Standard Use: 1.8 kg
Heavy-Duty Use: 1.4 kg


Marine-Grade Aluminum
High Strength Composite

You may also like…

Copyright © 2024 DTSL (Assistive Technology). All rights reserved.