Contents
Supported Cases
It is important that your keyguard is ordered to fit the case you have, or plan to use.
If you provide the incorrect case or “the next closest thing”, the keyguard won’t fit, and you’ll have to pay to remake it.
The list below is sorted in alphabetical order, to quickly search, use the Find function within your browser (Control + F or Command + F).
Commonly Sold Cases
- Bam Bino Space Suit
- Big Grips Lift
- BRAECN
- GoNow
- HDE Shock Proof
- Otterbox Defender
- Tobii Dynovox Speech Case
- UAG Metropolis
No Case Option
Case List
3SIXT Rugged Case for iPad 7th-8th Gen. 10.2
- Screen opening: 209 x 158 mm
- Outside dimensions: 262 x 186 x 20 mm
- Silicone skin over hard plastic shell
- Built-in off-centered folding stand makes it a little unstable
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
ACEGUARDER Antibacterial Kickstand iPad 7th-8th Gen 10.2/Air 10.5/Pro 10.5
There are three versions of this case, identical for keyguard purposes, but with a different kickstand on the back. The Version on the left just has a small kickstand with attachable shoulder strap (not included) on it. The version shown on the bottom has a small rotating kickstand with some adjustability, and locations in the back corners where you can attach a shoulder strap (not included). The version on the right has a wider non-rotating kickstand that is more stable and more adjustable, and it does not have the shoulder strap attachment.
- Screen opening: 215 x 161 mm
- Outside dimensions: 271 x 195 x 17 mm
- Elastic skin over polycarbonate shell
- Adjustable stand
- Comes in several colors
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Adocham/TopEsct Steering Wheel iPad 7th-8th Gen. 10.2, Air 3 10.5, Pro 10.5
- Screen opening: 224 x 161 mm
- Outside dimensions (including handles): 312 x 213 x 20 mm
- Comes in several colors
- Has a Apple pen holder
- Made out of silicone
- Built in stand
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Velcro, magnets |
AMDI iAdapter 10 for iPad 7th-8th Gen 10.2/Air 3 10.5/Pro 10.5
- Screen opening: 216 x 163 mm
- Outside dimensions: 280 x 216 mm
- Comes with handle, shoulder strap, and folding stand
- Built-in amplified speakers
- Available in black only. Optional colored skins may be added.
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
AMDI iAdapter iPad Mini
- Screen opening: 162 x 121 mm
- Outside dimensions: 233 x 161 mm
- Comes with handle, shoulder strap, and folding stand
- Built-in amplified speakers
- Available in black only. Optional colored skins may be added.
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
ARMOR-X Rainproof for iPad 7th-8th Gen. 10.2
This case is sold under a variety of brand names, especially in Australia, where it is often named with the brand of the website selling it.
- Screen opening: 217 x 162 mm
- Outside dimensions: 263 x 186 x 17 mm
- built-in screen protector
- Kickstand is in the center for equal balance
Best Attachment | Snap-In or lock-in for permanent mounting, |
Possible Attachment | Straps (last resort), Velcro for quick change |
Not Suitable for | Suction cups, suction tape, magnets |
ARMOR-X/CTA/MIESHERK Rotating Handle Stand iPad 7th-8th Gen. 10.2
This case is sold under a variety of brand names. To order a keyguard for this case, choose the ARMOR-X case #383
- Screen opening: 217 x 163mm
- Outside dimensions: 262 x 186 x 17 mm
- Kickstand is in the center for equal balance
Best Attachment | Snap-In or lock-in for permanent mounting, |
Possible Attachment | Straps (last resort), Velcro for quick change (Not very strong) |
Not Suitable for | Suction cups, suction tape, magnets |
ARMOR-X/Moko Waterproof iPad 7th-8th Gen 10.2
This case is sold under a variety of brand names. To order a keyguard for this case, choose the ARMOR-X case #388
- Screen opening: 8-5/8″ x 6-1/2″, 218 mm x 165 mm
- Outside dimensions: 10-7/16″ x 7-7/16″ x 9/16″, 265 mm x 189 mm x 14 mm
Best Attachment | Snap-in or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Magnets |
Azzsy Slim for iPad 7th-8th Gen. 10.2
- Screen opening: 210 mm x 159 mm
- Outside dimensions: 263 mm x 186 mm x 19 mm
- Silicone skin over hard plastic shell
- Built-in off-centered folding stand makes it a little unstable
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Ballistic Tough Jacket iPad Mini 4
- Screen opening: 192 x 124 mm
- Outside dimensions, not including detachable stand or corner bumpers: 210 x 141 x 15 mm
- Tough plastic shell with soft elastic insert to hold iPad and protect corners
- Detachable stand clips around hard shell
- Discontinued, but came in several colors
Bam Bino Space Suit for iPad Pro/Air3 10.5, 8th/7th Gen 10.2
- Screen opening: 218 x 163 mm
- Outside dimensions (with handle and folded feet): 281 x 236 x 30 mm
- EVA foam case
- Distinctive arched handle
- Two folding plastic stands behind the lower corners
- Built-in carrying handle
- Comes in a couple colors
Best Attachment | Snap-in or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) Velcro (Not very strong) |
Not Suitable for | Magnets |
Big Grips Lift iPad 7th-8th Gen. 10.2, Air 3 10.5, Pro 10.5
- Screen opening: 239 x 164 mm
- Outside dimensions (including handle): 297 x 254 x 39 mm
- Comes in several colors
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Big Grips Lift iPad Mini
- Screen opening: 188 x 121 mm
- Outside dimensions (with handle): 216 x 172 x 20 mm
- Comes in several colors
Best Attachment | Snap-in |
Possible Attachment | Suction cups, suction tape, lock-in, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Big Grips Tweener iPad Mini
- Screen opening: 189 x 120 mm
- Outside dimenstions: 216 x 147 x 22 mm
- Comes in several colors
Best Attachment | Snap-in |
Possible Attachment | Suction cups, suction tape, lock-in, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
BMOUO/Ledniceker w/ Removable Screen Protector iPad 7th-8th Gen 10.2
- Screen opening: 218 x 163 mm
- Outside dimensions (with handle): 272 x 237 x 25 mm
- Removable front bezel with built-in screen protector
- Comes in a variety of colors
- EVA material
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
BMOUO/LTROP Football Case w/ Removable Screen Protector iPad 7th-8th Gen 10.2
This case is sold under a variety of brand names. It’s easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached, and the large football embossed on the back. Not to be confused with the similar case above. Note that Amazon has a picture of this case, but when you buy it, it’s really the BMOUO/Ledniceker w/ Removable Screen Protector iPad 7th-8th Gen 10.2.
- Screen opening: 218 x 163 mm
- Outside dimensions (with handle): 272 x 241 x 31 mm
- Removable front bezel with built-in screen protector
- Football embossed on the back
- Impact-resistant EVA material
- Comes in a variety of colors
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
BMOUO/LTROP Rotating Handle Stand iPad 7th-8th Gen 10.2
This case is sold under several different brand names.
- Screen opening: 211 x 158 mm
- Outside dimensions (without rotating stand): 274 x 197 x 25 mm
- Silicone skin over two-piece plastic shell
- Shoulder strap
- Limited room makes for weak keyguards
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
BMOUO Rotating Square Handle Stand w/ Removable Screen Protector iPad 7th-8th-9th Gen 10.2
This case is sold under several different brand names.
- Screen opening: 212 x 160 mm
- Outside dimensions (without rotating stand): 274 x 197 x 22 mm
- Tough EVA foam case
- Removable screen protector in plastic frame
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
BRAECN Heavy Duty Three Layer Shock Proof w/ Swivel Stand iPad 7th-8th-9th Gen 10.2
It’s easy to identify this case by the giant “X” on the back, the rotating Velcro hand strap, and the delicate shoulder strap.
- Screen opening: 209 x 158 mm
- Outside dimensions (without rotating stand): 258 x 191 x 21 mm
- Nice silicone skin over the flimsiest two-piece breakable plastic shell imaginable
- Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
- Off-center folding stand makes it easy to tip over
- Conveniently comes apart if you drop it for easy access to the iPad
- Kids can take it apart with one hand. No kidding.
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
BRAECN Heavy Duty Three Layer Shock Proof w/ Swivel Stand, etc. iPad Mini 4
It’s easy to identify this case by the giant “X” on the back, the rotating Velcro hand strap, and the delicate shoulder strap.
- Screen opening: 163 x 123 mm
- Outside dimensions: 215 x 146 x 19 mm
- Nice silicone skin over the flimsiest two-piece breakable plastic shell imaginable
- Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
- Conveniently comes apart if you drop it for easy access to the iPad
- Kids can take it apart with one hand. No kidding.
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Brenthaven Edge 360 iPad 7th-8th Gen
- Screen opening: 238 x 161 mm
- Outside dimensions: 274 x 197 x 21 mm
- Really thin shell
- Flimsy plastic screen bezel stays on better than cheap competitors
- Folding stand
- Comes in three colors
Best Attachment | Snap-in |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Brenthaven Edge Folio III iPad 7th-8th-9th Gen 10.2
NOT the Folio II case!
- Screen opening: 243 x 167 mm
- Outside dimensions (case closed, not including feet): 267 x 191 x 17 mm
- Folio cover doubles as a stand
- Hard plastic shell with fabric textured top panel
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Suction tape, straps (last resort) |
Not Suitable for | Suction cups |
Bump Armor Foam-Carry iPad 7th-8th-9th Gen 10.2
Bump Armor’s variation on the classic folding handle case. The is not the same as the Classic EVA.
- Screen opening: 240 x 163 mm
- Outside dimensions (with handle): 266 x 277 x 29 mm
- Folding handle becomes stand
- Apple pencil holder
- Comes in several colors
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Cellular360 Shockproof Rotating Handle Stand iPad 7th-8th Gen 10.2
- Screen opening: 217 x 164 mm
- Outside dimensions (without rotating stand): 261 x 186 x 17 mm
- Stiff elastic skin over rigid frame
- Rotating handle stand
- Optional shoulder strap
- Available in many colors
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Cellular360 ShockProof iPad Mini 4/5
Sometimes called Drop Proof, sometimes called 360° Rotatable Kickstand and Handle, and formerly called Rugged Case
- Screen opening: 164 x 125 mm
- Outer dimensions (not including rotating handle): 215 x 146 x 15 mm
- Clever two-piece polycarbonate shell
- Nice silicone skin
- Comes with rotating handle stand
- Optional shoulder strap
- Good quality for the money
- Comes in several colors
ChatWrap/Prio iPad Mini 4/5
- Screen opening: 193 x 128 mm
- Outside dimensions (Without handle): 206 x 139 x 17 mm
- Durable rubber boot inside hard polycarbonate shell
- Padded handle
- Built-in amplified speaker
- Comes in several colors
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Classic EVA iPad 7th-8th-9th Gen 10.2/Air 3 10.5/Pro 10.5 #A
This case is sold under a huge variety of brand names. There’s not actually a “Classic EVA” brand, but that’s the name we use as a catch-all to identify them.
This model fits both the 7th Generation iPad 10.2″ and the Air 3 10.5/Pro 10.5″, but there are two variations of it. Check the measurements to see if you have #A or #B.
- Screen opening: 242 x 167 mm
- Outside dimensions (with handle): 275 x 272 x 22 mm
- Folding handle becomes stand
- Comes in several colors
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Classic EVA iPad 7th-8th-9th Gen 10.2/Air 3 10.5/Pro 10.5 #B
This case is sold under a huge variety of brand names. There’s not actually a “Classic EVA” brand, but that’s the name we use as a catch-all to identify them.
This model fits both the 7th Generation iPad 10.2″ and the Air 3 10.5/Pro 10.5″, but there are two variations of it. Check the measurements to see if you have #A or #B.
- Screen opening: 238 x 165 mm
- Outside dimensions (with handle): 276 x 280 x 24 mm
- Folding handle becomes stand
- Comes in several colors
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Classic EVA iPad Mini 1/2/3 #A
This case is sold under a huge variety of brand names. There’s not actually a “Classic EVA” brand, but that’s the name we use as a catch-all to identify them.
Over the years, the design has been offered in at least 3 variations. You need to determine which variation you have, or the keyguard will not fit. The list below shows how to determine if you have this model.
- Screen opening: 186 x 124 mm
- Outside dimensions (with handle): 218 x 212 x 19 mm
- Slotted back for inserting iPad
- Has round extension covering the home key, notch around camera
- Folding handle becomes stand
- Comes in several colors
Measure to be sure it’s not mistaken for #B or #C
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Classic EVA iPad Mini 1/2/3/4/5 #B
This case is sold under a huge variety of brand names. There’s not actually a “Classic EVA” brand, but that’s the name we use as a catch-all to identify them.
Over the years, the design has been offered in at least 3 variations. You need to determine which variation you have, or the keyguard will not fit. The list below shows how to determine if you have this model.
- Screen opening: 182 x 122 mm
- Outside dimension (with handle): 216 x 212 x 20 mm
- Slotted back for inserting iPad
- Rounded notch on one end of opening for access to home key, smaller rounded notch on the other end for camera opening
- Folding handle becomes stand
- Comes in several colors
Measure to be sure it’s not mistaken for #A or #C
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Classic EVA iPad Mini 4/5
This case is sold under a huge variety of brand names. There’s not actually a “Classic EVA” brand, but that’s the name we use as a catch-all to identify them.
Over the years, the design has been offered in at least 3 variations. You need to determine which variation you have, or the keyguard will not fit. The list below shows how to determine if you have this model.
- Screen opening: 194 x 125 mm
- Outside dimensions (with handle): 222 x 217 x 19 mm
- iPad is inserted from the front – no slot in back
- Angled notch on one end of opening for access to home key, camera end is straight
- Folding handle becomes stand
- Comes in several colors
Measure to be sure it’s not mistaken for #A or #B
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Cooper Bounce Strap iPad Mini
- Screen opening: 173 x 123 mm
- Outside dimension: 217 x 148 x 20 mm
- Made from stretchy silicone
- Four holes in corners to fit optional shoulder strap
- Super-flimsy folding stand on back
- Available in black, blue, pink, and camouflage
Best Attachment | Snap-in or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Velcro, magnets |
CWNOTHBY Rotating Handle Stand for iPad 7th-8th Gen 10.2
- Screen opening: 209 x 158 mm
- Outside dimensions: 262 x 186 x 21 mm
- Rotating handle stand
- Pencil holder on back
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Dteck Kids Case Tri-Layer iPad 7th/8h Gen 10.2
- Screen opening: 209 x 158 mm
- Outside dimensions (without rotating stand): 259 x 185 x 21 mm
- Flimsy silicone skin over rigid plastic frame
- Rotating handle stand
- Shoulder strap
- Available in many colors
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
EDGE Bounce iPad 7th-8th Gen 10.2
- Screen opening: 238 x 161 mm
- Outside dimensions (with handle stand): 283 x 277 x 25 mm
- Folding handle becomes stand
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Emio Tunebox iPad Mini
- Screen opening: 193 x 127 mm
- Outer dimensions (with handle): 258 x 255 x 22 mm
- Made from stretchy silicone
- Four holes in corners to fit optional shoulder strap
- Super-flimsy folding stand on back
- Available in black, blue, pink, and camouflage
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Fintie Folio Case iPad 7th-8th Gen 10.2
- Screen opening: 218 x 163 mm
- Outside dimensions: 251 x 175 x 14 mm
- Folding cover becomes stand
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Velcro, magnets |
Fintie Mighty Shield iPad 7th-8th-9th Gen 10.2
- Screen opening: 240 x 164 mm
- Outer dimensions: 269 x 197 x 24 mm
- Flexible EVA foam
- Rotating ring stand
Best Attachment | Snap-in |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Fintie Mighty Shield iPad Mini 4-5
- Screen opening: 186 x 125 mm
- Outer dimensions: 222 x 157 x 22 mm
- Flexible EVA foam
- Rotating ring stand
Best Attachment | Snap-in |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Fintie Tuatara iPad Air 2
- Screen opening: 210 x 158 mm
- Outside dimensions: 261 x 184 x 14 mm
- Has a built in rotating handle stand.
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
GoNow iPad 7th/8h Gen 10.2/Air 3 10.5/Pro 10.5
Rigid case screws together so iPad cannot be removed by the user. Acoustic chambers amplify the sound of the speakers.
- Screen opening: 213 x 160 mm
- Outside dimensions (with handle): 323 x 228 mm
- Integrated handle
- Four speaker openings
- Two folding feet
- Optional case, cover stand, shoulder strap, and screen protector
Best Attachment | Snap-In or lock-In for semi-permanent installation, magnetic for easy remove/install |
Possible Attachment | Velcro (good), straps (last resort) |
Not Suitable for | Suction cups, suction tape |
GoNow Rugged/Sleek iPad Mini 1/2/3/4/5
- Screen opening: 161 x 122 mm
- Outside dimensions (with handle): 272 x 171 x 16 mm
- Sleek version comes in silver for the Mini 1, 2, and 3
- Rugged version is green on gray for the Mini 4 and 5
- Integrated handle
- Optional case, cover stand, shoulder strap, and screen protector
Best Attachment | Snap-In or lock-In for semi-permanent installation, magnetic for easy remove/install |
Possible Attachment | Velcro (good), straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Griffin Survivor All-Terrain iPad 7th-8th Gen 10.2
- Screen opening: 213 x 160 mm
- Outside dimensions (with stand): 278 x 206 x 18 mm
- Flexible skin over rigid frame
- Weird folding stand clips on to both sides of the case
- Stylus/pen holder
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Griffin Survivor All-Terrain iPad Mini 1/2/3
- Screen opening: 166 x 122 mm
- Outside openings: 214 x 149 x 19 mm
- This version has an oval camera opening with a little plastic bulge around it that makes it different from most other All-Terrains
- The home key is exposed to the screen opening by a rounded V-shaped cutout
- Detachable folding stand clips to only one side of the case
- Available in different colors
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Griffin Survivor All-Terrain iPad Mini 4
- Screen opening: 166 x 123 mm
- Outside dimensions: 222 x 153 x 19 mm
- This version has an oval camera opening, and the screen opening is a straight line at the camera end
- The home key is exposed to the screen opening by a rounded V-shaped cutout
- Detachable folding stand clips to only one side of the case
- Available in different colors
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Griffin Survivor Armored iPad Mini 1/2/3
- Screen opening: 162 x 122 mm
- Outside dimensions: 214 x 149 x 20 mm
- Oval camera opening with small round elastic button over home key
- Detachable folding stand
- Available in different colors including camouflage
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Griffin Survivor Play/Crossgrip iPad Mini
- Screen opening: 168 x 125 mm
- Outside dimensions: 209 x 164 x 23 mm
- Made of tough silicone
- Play model available in pink or black
- Crossgrip model available in black or white
- Comes with shoulder strap
Best Attachment | Snap-in or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Griffin Survivor Slim iPad Mini 4
- Screen opening: 165 x 123 mm
- Outside dimensions: 214 x 150 x 16 mm
- Oval camera opening
- Home key is exposed to the screen opening by a rounded V-shaped cutout
- Sturdy attached folding stand
- Available in different colors
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Gripcase iPad Mini 1/2/3
- Screen opening: 197 x 129 mm
- Outside dimensions (with handles): 278 x 198 x 30 mm
- Bumpers on all four sides serve as handles
- Available in several colors
- Not for Mini 4
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Gumdrop DropTech iPad Mini 1/2/3
- Screen opening: 176 x 121 mm
- Outside dimension: 210 x 144 x 18 mm
- Frame has a small rounded cutout at the camera end
- Home key is covered with small elastic button as part of elastic skin
- Silicone skin over ABS shell
- Available in a variety of colors
Best Attachment | Snap-In or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Velcro, magnets |
Gumdrop Foam Tech iPad 7th-8th Gen 10.2
- Screen opening: 239 x 163 mm
- Outside dimensions (with handle): 279 x 279 x 24 mm
- Foam case with folding handle stand
- Available in a variety of colors
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Gumdrop FoamTech iPad Mini 1/2/3/4/5
- Screen opening: 192 x 126 mm
- Outside dimensions (ignoring handle): 234 x 190 x 25 mm
- Foam case with folding handle stand
- Available in a variety of colors
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Gumdrop Hideaway iPad 7th-8th Gen 10.2
- Screen opening: 237 x 162 mm
- Outside dimensions: 264 x 188 x 19 mm
- Silicone skin over ABS shell
- Attached folding handle stand
- Available in a variety of colors
Best Attachment | Snap-In or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Velcro, magnets |
Gumdrop Hideaway iPad Mini 3
- Screen opening: 177 x 122 mm
- Outside dimensions: 211 x 146 x 18 mm
- Silicone skin over ABS shell
- Attached folding handle stand
- Available in a variety of colors
Best Attachment | Snap-In or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable f | Velcro, magnets |
Gumdrop Hideaway iPad Mini 4
- Screen opening: 185 x 121 mm
- Outside dimension: 214 x 146 x 17 mm
- Silicone skin over ABS shell
- Attached folding handle stand
- Available in a variety of colors
Best Attachment | Snap-In or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable f | Velcro, magnets |
HDE Dual Layer w/ Screen Protector iPad 7th-8th Gen 1.2.
Sometimes called Dual Layer Shockproof Case or Kids Shockproof Bumper or Hard Cover Handle Stand.
- Screen opening: 212 x 159 mm
- Outside dimensions (with handle): 279 x 273 x 23 mm
- EVA foam case with polycarbonate frame
- Camera and ambient light sensor openings may vary by iPad model
- Some versions have handle drilled for possible shoulder-strap attachment, some versions do not
- Comes in a variety of colors, including two-tone
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
HDE Shock Proof iPad 10.2
The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.
HDE Shock Proof iPad Mini
The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.
HDE Shock Proof Steering Wheel iPad Mini
- Screen opening: 177 x 126 mm
- Outside dimensions (with handles): 281 x 200 x 20 mm
- Rugged EVA foam with handles on top, left, and right
- Funky handle stand on back
- Available in different colors
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
HDE Shock Proof w/ Screen Protector iPad Mini 4/5
Sometimes called Dual Layer Shockproof Case or Kids Shockproof Bumper or Hard Cover Handle Stand. Can be easily confused with the HDE case below. Measure the screen opening to determine which one you have.
- Screen opening: 163 x 123 mm
- Outside dimension (with handle): 228 x 237 x 21 mm
- EVA foam case with polycarbonate frame
- Handle is drilled for possible shoulder-strap attachment
- Comes in a variety of colors, including two-tone
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Suction tape, straps (last resort) |
Not Suitable for | Magnets, suction cups |
HDE Dual Layer w/ Screen Protector iPad Mini 1/2/3
Sometimes called Dual Layer Shockproof Case or Kids Shockproof Bumper or Hard Cover Handle Stand. Can be easily confused with the HDE case above. Measure the screen opening to determine which one you have.
- Screen opening: 162 x 122 mm
- Outside dimension (with handle): 228 x 229 x 22 mm
- EVA foam case with polycarbonate frame
- Handle is drilled for possible shoulder-strap attachment
- Comes in a variety of colors, including two-tone
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Suction tape, straps (last resort) |
Not Suitable for | Magnets, suction cups |
HXCASE AC Rotating Handle Stand iPad 7th-8th Gen 10.2
- Screen opening: 210 x 158 mm
- Outside dimensions: 269 x 195 x 22 mm
- Removable front bezel with built-in screen protector
- Rotating handle/stand on back
- Thin shoulder strap
- Stylus/pen holder
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Joy Factory aXtion Bold iPad 7th-8th Gen 10.2.
This is a very expensive case whose only unique feature is a security cable that attaches with double-sided tape. If you want people to not bother stealing your iPad because it looks like it’s secured to the table, this might be the case for you. Otherwise, there are many less expensive cases that provide the same or more protection to the iPad.
- Screen opening: 211 x 159 mm
- Outside dimensions (measured near the corners): 271 x 194 x 22 mm
- 360° rotating handle with small, flimsy stand
- Built-in screen protector
- High-quality silicone skin is difficult to seat over thin, flimsy frame
- Security cable taped to back of iPad is apparent theft deterrent
- Slotted corners for attaching shoulder strap (not included)
Best Attachment | Snap-In or Lock-in for permanent mounting |
Possible Attachment | straps (last resort) |
Not Suitable for | Velcro, magnets, suction cups, suction tape |
Joy Factory aXtion Pro MP iPad 7th-8th Gen 10.2
This is a very expensive case whose only unique feature is a security cable that attaches with double-sided tape. If you want people to not bother stealing your iPad because it looks like it’s secured to the table, this might be the case for you. Otherwise, there are many less expensive cases that provide the same or more protection to the iPad.
- Screen opening: 211 x 159 mm
Best Attachment | Snap-In or Lock-in for permanent mounting |
Possible Attachment | straps (last resort) |
Not Suitable for | Velcro, magnets, suction cups, suction tape |
Ledniceker/BUOMO w/ Removable Screen Protector iPad 7th-8th Gen 10.2
This case is sold under a variety of brand names. It’s easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached, and the large football embossed on the back. Not to be confused with the similar case (LTROP/BMOUO Football Case) below.
- Screen opening: 218 x 163 mm
- Outside dimensions (with handle): 272 x 237 x 25 mm
- Removable front bezel with built-in screen protector
- Comes in a variety of colors
- EVA material
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Ledniceker NO Removable Screen Protector iPad Mini 1/2/3/4/5
There are similar-looking cases branded with different names, but this is the one that has no removable screen protector and no shoulder strap. Some versions of this case come with a tempered glass screen protector instead of the removable one.
- Screen opening: 190 x 125 mm
- Outside dimensions (including handle and corner stands): 223 x 202 x 30 mm
- EVA foam case
- Distinctive arched handle
- Two folding plastic stands behind the lower corners
- NO removable screen protector
- Comes in a variety of colors
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
LTROP/BMOUO Football Case w/ Removable Screen Protector iPad 7th-8th Gen 10.2
This case is sold under a variety of brand names. It’s easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached, and the large football embossed on the back. Not to be confused with the similar case (Ledniceker/BUOMO) above.
- Screen opening: 218 x 163 mm
- Outside dimensions (with handle): 272 x 241 x 31 mm
- Removable front bezel with built-in screen protector
- Football embossed on the back
- Impact-resistant EVA material
- Comes in a variety of colors
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Ledniceker/LTROP/TIRIN Robot Case iPad 7th-8th Gen 10.2
There are similar-looking cases that should not be confused for the Ledniceker Kids Case, sometimes called the Shock Proof Smart Handle Stand. This case has a banana-shaped opening under the top handle and cat’s eye-shaped openings under the right and left handles. Some versions have cutouts in the top and bottom left corners for the ambient light sensors on certain models of the iPad 10.2.
- Screen opening: 240 x 165 mm
- Outside dimensions (including handles and kick stand): 350 x 249 x 21 mm
- Headphone-wearing robot on back
- Robot’s legs fold out to become a stand
- Comes with thin shoulder strap
Best Attachment | Snap-in or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
LifeProof FRĒ iPad Mini 1/2/3
- Screen opening: 195 x 126 mm
- Outside dimensions: 217 x 147 x 14 mm
- Silicone skin over polycarbonate shell
- Available in black or white
- Claims to be waterproof
- Very expensive
Best Attachment | Snap-In or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
LifeProof NÜÜD iPad Mini 1/2/3
- Screen opening: 186 x 126 mm
- Outside dimensions: 218 x 146 x 13 mm
- Distinctive arched bulge around home key
- Silicone skin over polycarbonate shell
- Available in black or white
- Claims to be waterproof
- Very expensive
Best Attachment | Snap-In or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
LifeProof NÜÜD iPad Mini 4
- Screen opening: 186 x 128 mm
- Outside dimensions: 218 x 150 x 13 mm
- Distinctive arched bulge around home key. The top of the arch is flattened, unlike the Mini 1/2/3 case whose arch is fully rounded.
- Silicone skin over polycarbonate shell
- Available in black or white
- Claims to be waterproof
- Very expensive
Best Attachment | Snap-In or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
LTROP Kickstand 7th-8th Gen 10.2
Not to be confused with the LTROP Rotating Handle Stand below.
- Screen opening: 218 x 164 mm
- Outside dimensions: 263 x 187 x 18 mm
- Built-in screen protector
- Regular folding back stand
Best Attachment | Snap-In or lock-in for permanent mounting |
Possible Attachment | Straps (last resort) , Velcro |
Not Suitable for | Suction cups, suction tape, magnets |
LTROP/BMOUO Rotating Handle Stand iPad 7th-8th Gen 10.2
Not to be confused with the LTROP Kickstand above. This case is sold under several different brand names.
- Screen opening: 211 x 158 mm
- Outside dimensions (without rotating stand): 274 x 197 x 25 mm
- Silicone skin over two-piece plastic shell
- Shoulder strap
- Limited room makes for weak keyguards
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
LTROP/Ledniceker Robot Case iPad 7th-8th Gen 10.2
There are similar-looking cases that should not be confused for the LTROP Kids Case, sometimes called the Shock Proof Smart Handle Stand. This case has a banana-shaped opening under the top handle and cat’s eye-shaped openings under the right and left handles. Some versions have cutouts in the top and bottom left corners for the ambient light sensors on certain models of the iPad 10.2.
- Screen opening: 240 x 165 mm
- Outside dimensions (including handles and kick stand): 350 x 249 x 21 mm
- Headphone-wearing robot on back
- Robot’s legs fold out to become a stand
- Comes with thin shoulder strap
Best Attachment | Snap-in or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
M-Edge Super Shell iPad Mini 4
- Screen opening: 200 x 134 mm
- Outside dimensions: 226 x 158 x 19 mm
- Hard rubber skin over strong plastic frame
- Home key is covered by an extension of the elastic outer skin
- Full-length folding stand is stable, but for only one upright position
Best Attachment | Suction cups, suction tape |
Possible Attachment | Straps (last resort) |
Not Suitable for | Snap-In, Velcro, magnets |
MAXCases Shield Extreme-X for iPad 7th-8th Gen 10.2
- Screen opening: 209 x 158 mm
- Outside dimensions: 266 x 190 x 17 mm
- Built-in screen protector
- Attached folding stand
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
MIESHERK/ARMOR-X Rotating Handle Stand iPad 7th-8th Gen. 10.2
This case is sold under a variety of brand names.
- Screen opening: 217 x 163mm
- Outside dimensions: 262 x 186 x 17 mm
- Kickstand is in the center for equal balance
Best Attachment | Snap-In or lock-in for permanent mounting, |
Possible Attachment | Straps (last resort), Velcro for quick change (Not very strong) |
Not Suitable for | Suction cups, suction tape, magnets |
Moko/ARMOR-X Waterproof iPad 7th-8th Gen 10.2
This case is sold under a variety of brand names.
- Screen opening: 218 x 165 mm
- Outside dimensions: 265 x 189 x 14 mm
Best Attachment | Snap-in or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Magnets |
MoKo 3Z Case iPad Mini 4
- Screen opening: 202 x 133 mm
- Outside dimensions: 207 x 139 x 11 mm
Best Attachment | |
Possible Attachment | Velcro, suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, magnets, snap-in |
No Case For iPad 7th-8th Gen 10.2
When you want a quote for a keyguard for an iPad that is not in a case, specify “No Case”.
Best Attachment | Velcro for quick change, suction cups, suction tape |
Possible Attachment | Straps (last resort) |
Not Suitable for | Magnets, snap-In or lock-in |
No Case For iPad Mini 2/3
When you want a quote for a keyguard for an iPad mini that is not in a case, specify “No Case”.
Best Attachment | Velcro for quick change, suction cups, suction tape |
Possible Attachment | Straps (last resort) |
Not Suitable for | Magnets, snap-in or lock-in |
Otterbox Defender iPad 7th-8th Gen 10.2
- Screen opening: 238 x 162 mm
- Outside dimensions (without stand): 262 x 185 x 17 mm
- Funky clip-on back piece removes to become a huge folding stand
- Elastic skin over 2-part polycarbonate frame
- Screen protector built in
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Otterbox Defender iPad Mini 2/3
- Screen opening: 166 x 126 mm
- Outside dimensions (with stand): 209 x 144 x 26 mm
- Oval camera opening
- Funky clip-on back piece removes to become a huge folding stand
- Elastic skin over 2-part polycarbonate frame
- Home key is covered by an extension of the elastic outer skin
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Otterbox Defender iPad Mini 3/4
- Screen opening: 164 x 126 mm
- Outside dimensions (with stand): 213 x 146 x 26 mm
- Trapezoidal camera opening
- Mini 4 version has openings for ambient light sensors near the outer edge of the case, unlike the Mini 5 case below
- Funky clip-on back piece removes to become a huge folding stand
- Elastic skin over 2-part polycarbonate frame
- Home key is exposed to the screen opening by a rounded V-shaped cutout
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Otterbox Defender iPad Mini 5
- Screen opening: 165 mm x 127 mm
- Outside dimensions (without stand): 219 mm x 148 mm x 16 mm
- Trapezoidal camera opening
- 2 openings for ambient light sensors close to the screen opening, unlike the Mini 4 case above
- Funky clip-on back piece removes to become a huge folding stand
- Elastic skin over 2-part polycarbonate frame
- Home key is exposed to the screen opening by a rounded V-shaped cutout
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Otterbox EasyGrab iPad Mini 5
- Screen opening: 165 x 126 mm
- Outside dimensions (with stand): 220 x 149 x 20 mm
- Trapezoidal camera opening
- Funky clip-on back piece.
- Elastic skin over 2-part polycarbonate frame
- Home key is exposed to the screen opening by a rounded V-shaped cutout
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
PEPKOO Ring Handle Stand iPad 7th-8th Generation
- Screen opening: 208 x 156 mm
- Outside dimensions: 276 x 207 x 27 mm
- Removable screen bezel makes for convenient mounting of keyguard
- Goofy round stand is actually not as tippy as it looks
Best Attachment | Snap-In or lock-in for permanent mounting |
Possible Attachment | Velcro for quick change, straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Poetic Revolution iPad 7th-8th Gen 10.2
- Screen opening: 213 x 159 mm
- Outside dimensions: 262 x 184 x 16 mm
- Built-in screen protector
- Regular folding back stand
- Strong TPU covering a hard polycarbonate case
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Rug-Ed ProLOCK iPad 7th-8th Gen 10.2/Air 3 10.5/Pro 10.5
- Screen opening: 9-7/16″ x 6-9/16″, 240 mm x 166 mm
- Outside dimensions (with handle): 11-3/8″ x 7-3/4″ x 11/16″, 289 mm x 197 mm x 18 mm
Best Attachment | Snap-in or lock-in for permanent mounting |
Possible Attachment | Suction cups (limited room), suction tape, straps (last resort) |
Not Suitable for | Magnets, Velcro |
SEYMAC Handle Stand iPad Mini 1/2/3 #A
Not to be confused with the other SEYMAC cases. Those have a rotating handle stand. This one has the folding stand only.
- Screen opening: 163 x 123 mm
- Outside dimensions: 218 x 153 x 18 mm
- Tough elastic skin over tough hard plastic shell
- Thin shoulder strap
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
SEYMAC 3-Layer Smart Cover iPad Mini 1/2/3
- Screen opening: 164 mm x 125 mm
- Outside dimensions (without smart cover): 8-1/4″ x 5-15/16″ x 11/16″, 210 mm x 151 mm x 17 mm
- Flexible tough polyurethane skin over tough polyurethane hard shell
- Polyurethane leather folding magnetic “smart cover”
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
SEYMAC Three Layer Rotating Handle Stand iPad 7th-8th Gen 10.2
This case is sold under several different brand names, including Ambison, CLARKCAS, Herize, and TimeCity, among others. One thing to note is that the small screen opening can require compromises on the keyguard design. Items close to the edge of the screen may be hard to reach.
- Screen opening: 211 x 158 mm
- Outside dimensions (without rotating handle): 269 x 195 x 22 mm
- Removable front bezel with built-in screen protector
- Rotating handle/stand on back
- Thin shoulder strap
- Stylus/pen holder
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
SEYMAC Three Layer Rotating Handle Stand iPad Mini 6 8.3
This case is sold under several different brand names. One thing to note is that the small screen opening can require compromises on the keyguard design. Items close to the edge of the screen may be hard to reach.
- Screen opening: 180 x 119 mm
- Outside dimensions (without rotating handle): 213 x 168 x 22 mm
- Removable front bezel with built-in screen protector
- Additional second bezel with no screen protector
- Rotating handle/stand on back
- Thin shoulder strap
- Second, shorter strap serves as a handle
- Stylus/pen holder
- High quality and affordable
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
SEYMAC Stock Rotating Handle Stand iPad Mini 4/5
SEYMAC makes several similar-looking cases that can be easily confused. Do not confuse this with the “Three Layer” version below. That one has the screen protector in a removable bezel that clips on to the front of the case. This one has a one-piece frame with an elastic skin around it.
- Screen opening: 182 x 123 mm
- Outside dimensions (without rotating handle): 213 x 145 x 17 mm
- Tough elastic skin over tough hard plastic shell
- Removable front bezel with built-in screen protector
- Rotating handle/stand on back
- Stylus/pen holder
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
SEYMAC Three Layer Hybrid Rotating Stand iPad Mini 4/5
SEYMAC makes several similar-looking cases that can be easily confused. Do not confuse this with the “Stock” version above. That one has a one-piece frame with an elastic skin around it. This one has the screen protector in a removable bezel that clips on to the front of the case.
- Screen opening: 165 x 125 mm
- Outside dimensions (without rotating handle): 225 x 156 x 20 mm
- Tough elastic skin over tough hard plastic shell
- Removable front bezel with built-in screen protector
- Rotating handle/stand on back
- Thin shoulder strap
- Stylus/pen holder
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Spigen Tough Armor Tech Works iPad Mini 5
- Screen opening: 198 x 129 mm
- Outside dimensions: 207 x 141 x 13 mm
- Hard rubber shell snaps on to hard plastic back
- Integrated flimsy folding stand
Best Attachment | |
Possible Attachment | Velcro, suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, magnets, snap-in |
STM Dux Plus Duo iPad 7th-8th Gen 10.2
- Screen opening: 248 x 171 mm
- Outside dimensions (closed with pen holder): 263 x 188 x 14 mm
- Hard polyurethane shell with felt-lined cover
- Folding folio cover doubles as a stand
- Pen holder
Best Attachment | |
Possible Attachment | Velcro, suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, magnets, snap-In |
STM Dux iPad Mini 1/2/3
- Screen opening: 194 x 131 mm
- Outside dimensions: 209 x 148 x 26 mm
- Fake leather folio cover over hard rubber shell
- 360 degree rotating plastic piece serves some purpose
- Cover opens to become semi-adjustable stand
- Magnetic flap secures cover closed
- Affordable
Best Attachment | |
Possible Attachment | Velcro, suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, magnets, snap-in |
Targus SafePort iPad 7th-8th Gen 10.2
- Screen opening: 243 x 170 mm
- Outside dimensions: 270 x 193 x 15 mm
- Pen holder
- Folding handle/stand on the back
Best Attachment | Suction cups |
Possible Attachment | Velcro, suction tape, straps (last resort) |
Not Suitable for | Lock-in, magnets, snap-In |
Targus VersaVu Slim Rotating Tablet Case
- Screen opening: 194 x 129 mm
- Outside dimensions: 207 x 148 x 26 mm
- Fake leather folio cover over hard rubber shell
- 360 degree rotating plastic piece serves some purpose
- Cover opens to become semi-adjustable stand
- Magnetic flap secures cover closed
- Affordable
Best Attachment | |
Possible Attachment | Velcro, suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, magnets, snap-in |
Temdan Waterproof iPad Mini 4
- Screen opening: 194 x 127 mm
- Outside dimensions: 215 x 147 x 15 mm
- Hard rubber skin over hard plastic snap-together shell
- Built-in screen protector
- Sketchy stick-on folding stand
- Thin shoulder strap
- Claims to be waterproof
Best Attachment | Snap-in or lock-in for permanent mounting (breaks the waterproof seal), |
Possible Attachment | Suction cups, suction tape, Velcro, straps (last resort) |
Not Suitable for | magnets |
TIRIN/Ledniceker w/ Removable Screen Protector iPad 7th-8th Gen 10.2
- Screen opening: 218 x 163 mm
- Outside dimensions (with handle): 272 x 237 x 25 mm
- Removable front bezel with built-in screen protector
- Comes in a variety of colors
- EVA material
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
TIRIN/Ledniceker Robot Case For Kids 7th-8th Gen 10.2
There are similar-looking cases that should not be confused for the TIRIN Kids Case, sometimes called the Shock Proof Smart Handle Stand. This case has a banana-shaped opening under the top handle and cat’s eye-shaped openings under the right and left handles. Some versions have cutouts in the top and bottom left corners for the ambient light sensors on certain models of the iPad 10.2.
- Screen opening: 240 x 165 mm
- Outside dimensions (including handles and kick stand): 350 x 249 x 21 mm
- Headphone-wearing robot on back
- Robot’s legs fold out to become a stand
- Comes with thin shoulder strap
Best Attachment | Snap-in or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
TIRIN Robot Kids Case iPad Mini 1/2/3/4/5
There are similar-looking cases that should not be confused for the TIRIN Kids Case, sometimes called the Shock Proof Smart Handle Stand. This case has a banana-shaped opening under the top handle and cat’s eye-shaped openings under the right and left handles. Some versions have cutouts in the top and bottom left corners for the ambient light sensors on certain models of the iPad Mini.
- Screen opening: 190 x 125 mm
- Outside dimensions (including handles and kick stand): 305 x 210 x 31 mm
- Headphone-wearing robot on back
- Robot’s legs fold out to become a stand
- Comes with thin shoulder strap
Best Attachment | Snap-in or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Tobii-Dynovox Speech Case w Keyguard Holder iPad 7th-8th Gen 10.2
- Screen opening: 212 x 159 mm
- Outside dimensions: 273 x 196 mm
- Eight-sided rectangular camera opening with elastic button over home key
- Polyurethane skin over polycarbonate shell
- Pro version includes built-in screen protector
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
TopEsct iPad Mini 1/2/3/4
- Screen opening: 177 x 125 mm
- Outside dimensions (including handles and stand): 265 x 178 x 18 mm
- High quality silicone soft gel
- Handles on top, right and left
- Comes with tempered glass screen protector
- Available in several colors
- Affordable – good value with screen protector
Best Attachment | Snap-in or lock-in for permanent mounting |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
TopEsct Steering Wheel iPad 7th-8th Gen. 10.2, Air 3 10.5, Pro 10.5
- Screen opening: 224 x 161 mm
- Outside dimensions (including handles): 312 x 213 x 20 mm
- Comes in several colors
- Has a Apple pen holder
- Made out of silicone
- Built in stand
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Velcro, magnets |
Transy Waterproof for iPad 7th-8th Gen 10.2
- Screen opening: 212 x 159 mm
- Outside dimensions: 265 x 192 x 18 mm
- Built-in screen protector
- Attachable folding stand and shoulder strap
- Pencil holder on side of case
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
Transy Waterproof iPad Mini 5
- Screen opening: 193 x 124 mm
- Outside dimensions: 218 x 152 x 16 mm
- Built-in screen protector
- Claims to be waterproof
- Available in three colors of inner shell inside gray/black skin
Best Attachment | Snap-in or lock-in for permanent mounting, |
Possible Attachment | Suction cups, suction tape, Velcro, straps (last resort) |
Not Suitable for | Magnets |
Trident Kraken AMS Industrial iPad Mini 1/2/3
There were many slight variations of this case called Kraken or Kraken AMS or Kraken AMS Industrial. Don’t confuse this case for any of the others. This one is the one with the four slits for a shoulder strap, two on each of the long edges of the case.
- Screen opening: 166 x 125 mm
- Outside dimensions: 213 x 159 x 17 mm
- Optional shoulder strap attaches to slits in long edges of case
- Available in a few colors
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape |
UAG Metropolis iPad 7th-8th Gen 10.2
- Screen opening: 248 x 171 mm
- Outside dimensions (closed with pen holder): 263 x 188 x 14 mm
- Hard polyurethane shell with felt-lined cover
- Folding folio cover doubles as a stand
- Pen holder
Best Attachment | |
Possible Attachment | Velcro, suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, magnets, snap-In |
Ubearkk “Cat Ears” Case iPad Mini 1/2/3/4/5
There are similar-looking cases branded with different names, but this is the one that has no removable screen protector and no shoulder strap. Some versions of this case come with a tempered glass screen protector instead of the removable one.
- Screen opening: 189 x 123 mm
- Outside dimensions (including handle and corner stands): 223 x 203 x 32 mm
- EVA foam case
- Distinctive arched handle
- Two folding plastic stands behind the lower corners
- Comes in a variety of colors
Best Attachment | Snap-In |
Possible Attachment | Suction cups, suction tape, straps (last resort) |
Not Suitable for | Lock-in, Velcro, magnets |
Unicorn Beetle Pro iPad 7th-8th Gen 10.2
- Screen opening: 220 x 163 mm
- Outside dimensions: 262 x 184 x 17 mm
- Rounded rectangle camera opening with two rhomboid openings for the ambient light sensors
- Home key is exposed to the screen opening by a rounded trapezoidal notch
- Polyurethane skin over polycarbonate shell
- Built-in screen protector
- Attached folding stand
- Easiest rigid case to insert and remove iPad
- Available in several colors
- Affordable – the best value among rigid cases
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Unicorn Beetle Pro iPad Mini 1/2
This case is no longer available, so if you want a keyguard for is, you’ll have to send us the case.
- Oval camera opening with elastic button over home key
- Polyurethane skin over polycarbonate shell
- Pro version has built-in screen protector
- Easiest rigid case to insert and remove iPad
- Available in several colors
- Affordable – the best value among rigid cases
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Unicorn Beetle Pro iPad Mini 1/2/3
- Screen opening: 164 x 125 mm
- Outside dimensions: 212 x 148 x 15 mm
- Oval camera opening
- Home key is exposed to the screen opening by a rounded trapezoidal notch
- Polyurethane skin over polycarbonate shell
- Built-in screen protector
- Easiest rigid case to insert and remove iPad
- Available in several colors
- Affordable – the best value among rigid cases
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Unicorn Beetle Pro iPad Mini 4/5
- Screen opening: 167 x 124 mm
- Outside dimensions: 212 x 145 x 14 mm
- Screen opening has rounded corners
- Oval camera opening with 2 rounded openings for the ambient light sensors
- Home key is exposed to the screen opening by a rounded trapezoidal notch
- Polyurethane skin over polycarbonate shell
- Built-in screen protector
- Easiest rigid case to insert and remove iPad
- Available in several colors
- Affordable – the best value among rigid cases
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Unicorn Beetle Pro iPad Mini 5
- Screen opening: 167 x 125 mm
- Outside dimensions: 213 x 146 x 15 mm
- Screen opening has beveled corners
- Oval camera opening with 4 rhomboid openings for the ambient light sensors
- Home key is exposed to the screen opening by a rounded trapezoidal notch
- Polyurethane skin over polycarbonate shell
- Built-in screen protector
- Easiest rigid case to insert and remove iPad
- Available in several colors
- Affordable – the best value among rigid cases
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
Unicorn Beetle Pro iPad Mini 6
- Screen opening: 178 x 118 mm
- Outside dimensions: 206 x 156 x 15 mm
- Polyurethane skin over polycarbonate shell
- Built-in screen protector
- One of the easiest rigid cases to insert and remove iPad
- Available in several colors
- Affordable – the best value among rigid cases
Best Attachment | Snap-in or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
UZBL Aftershock for iPad 7th-8th Gen 10.2
Not to be confused with the ShockWave v1 or v2 cases below which look similar. They are not interchangeable. Check the measurements to be sure which one you have.
- Screen opening: 220 x 158 mm
- Outside dimensions: 270 x 191 x 17 mm
- Built-in screen protector
- Attached folding stand
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
UZBL ShockWave v1 iPad 7th-8th-9th Gen 10.2
Not to be confused with the ShockWave v2 case below or the Aftershock case above which look similar. They are not interchangeable. Check the measurements to be sure which one you have.
- Screen opening: 210 x 158 mm
- Outside dimensions: 270 x 197 x 22 mm
- Elastic skin over rigid frame
- Removable screen protector frame clips to front
- Attached folding stand
- Apple Pencil holder
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |
UZBL ShockWave v2 iPad 7th-8th-9th Gen 10.2
Not to be confused with the ShockWave v1 case or the Aftershock case above which look similar. They are not interchangeable. Check the measurements to be sure which one you have.
- Screen opening: 220 x 158 mm
- Outside dimensions: 263 x 187 x 18 mm
- Elastic skin stretches over two-piece rigid frame
- Built-in screen protector
- Attached folding stand
Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change |
Possible Attachment | Straps (last resort) |
Not Suitable for | Suction cups, suction tape, magnets |